Type S Full Length Bushing Die – Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
- Uses the same interchangeable bushing (.001″ increments) as those used in Redding’s bushing style neck sizing dies.
- The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired.
- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
- All Type S (except 17 and 20 cal) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under Redding’s Type S -Bushing Style Neck Sizing Dies.
Note: By removing the bushing and all internal parts, the Type S Full Bushing Die may also be used as a body die.
How to Determine Which Bushings You Need:
The easiest way to determine the proper diameter bushing, is to measure the neck diameter of several loaded or dummy cartridges with an accurate micrometer. Subtract .001 – .002 from the average neck diameter and this diameter bushing will generally size case necks to create the proper press fit for the bullet.
Shell Holder #10 Sold Separately
In Stock (6)
In Stock (2)
Out of Stock
Reviews
There are no reviews yet.