Wilson Case Gage 6.5 PRC

The most important use of a cartridge case gage is for setting up 7⁄8″-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper.

• Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing.
• Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder.

SPECS:

• Contents: Gage & instructions a cardboard box
• OAL: 2.494″
• ID: Large end: .473″. small end: .347″
• OD: .991″
• Color: Silver with knurling in the middle